GSL-5-1800
GSL-5-1800 muffle furnace
Lab & testing ≤ 1600 °C Ambient air Sintering / debindingTesting
Part of our muffle furnace range — selection notes and all systems →
KEY DATADELIVERED
MAX TEMP
1600℃
ATMOSPHERE
Ambient air
CATEGORY
Lab & testing
SOURCE
Proposal text
From the original technical proposalAHGSTEC
Verification note.A muffle furnace is typically used for sintering and laboratory high-temperature processing.
Specification
Specification
Taken from the original technical proposal. Ranges indicate configurable options; the signed technical agreement governs.
Primary A
- Max. working temperature
- 1600 °C
- Limit temperature
- 1700–1800 °C (short-term operation)
- Heating rate
- 0–20 °C/min
- Chamber dimensions
- 500 × 500 × 500 mm (W×D×H)
- Chamber material
- High-purity alumina fiber board (Al₂O₃ ≥ 95 %)
- Heating elements
- High-performance MoSi₂ alloy (SiMo), on left, right and rear walls
Secondary B
- Thermocouple
- Long-life type B (Pt/PtRh)
- Temperature control accuracy
- ±1 °C (PID)
- Insulation
- Ceramic fiber, thickness ≥ 100 mm
- Shell cooling
- 2 axial fans, airflow ≥ 50 m³/h
- Power supply
- AC 380 V (three-phase) / 50 Hz
- Ambient requirements
- ≤ 40 °C, relative humidity ≤ 85 %
Structure
Cross-section
Click any part to see its role. Together these eight determine the final thermal performance.
PART 01
Chamber
One-piece polycrystalline alumina ceramic fiber. High density, low conductivity, no dusting at temperature — the first determinant of uniformity.
- Material
- Polycrystalline alumina fiber
- Continuous rating
- ≤ 650 °C
- Construction
- Seamless, one-piece
Related
Related systems
Integrated uniform-temperature heating stage
TEMP700 °C
ATMOSPHEREAmbient air
PROCESSAnnealing
CATEGORYLab & testing
DH-3S-D
DH-3S-D ignition point test muffle furnace
TEMP900 °C
ATMOSPHEREAmbient air
PROCESSTesting
CATEGORYLab & testing
GST-3212H
GST-3212H high-temperature fire simulation test chamber
TEMP1200 °C
ATMOSPHEREAmbient air
PROCESSTesting
CATEGORYLab & testing