GSZ-75-1000
GSZ-75-1000 batch rotary furnace
Sintering & calcining ≤ 1000 °C Inert / reducingAmbient air Sintering / debindingDrying
Part of our sintering furnace range — selection notes and all systems →
KEY DATADELIVERED
MAX TEMP
1000℃
ATMOSPHERE
Inert / reducing / Ambient air
CATEGORY
Sintering & calcining
SOURCE
Proposal text
From the original technical proposalAHGSTEC
Specification
Specification
Taken from the original technical proposal. Ranges indicate configurable options; the signed technical agreement governs.
Primary A
- Model
- GSZ-75-1000
- Max. temperature
- 1000 °C
- Typical operating temperature
- 800 °C
- Power supply
- Three-phase 380 V, 50 Hz
- Rated power
- 24 kW
- Temperature control accuracy
- ±2 °C
- Rotary retort
- Outer diameter 260 mm, total length 2.5 m, constant-temperature zone 2 m
- Heated-zone volume
- Length 2 m, inner diameter 245 mm, total volume 85 L
Secondary B
- Rotation speed
- 1–12 rpm, adjustable
- Outer wall temperature rise
- < 50 °C
- Thermocouples
- 3 × type K
- Retort pressure
- 0.1 MPa (safety design against blockage-induced pressure)
- Process gas
- Nitrogen, argon, air, etc., 0–20 L/min
- Insulation material
- Polycrystalline alumina ceramic fibre
- Control zones
- 3 zones
- Tilting angle
- approx. 10°
Structure
Cross-section
Click any part to see its role. Together these eight determine the final thermal performance.
PART 01
Chamber
One-piece polycrystalline alumina ceramic fiber. High density, low conductivity, no dusting at temperature — the first determinant of uniformity.
- Material
- Polycrystalline alumina fiber
- Continuous rating
- ≤ 650 °C
- Construction
- Seamless, one-piece
Related
Related systems
Calciner
TEMP600 °C
ATMOSPHEREAmbient air
PROCESSSintering / debinding
CATEGORYSintering & calcining
Al₂O₃-lined 800 °C lithium iron phosphate sintering furnace
TEMP800 °C
ATMOSPHEREVacuum
PROCESSSintering / debinding
CATEGORYSintering & calcining
GSF-12-1700
GSF-12-1700 bell-type sintering furnace
TEMP1700 °C
ATMOSPHEREAmbient air
PROCESSSintering / debinding
CATEGORYSintering & calcining