GS-T-1100S high-temperature heat treatment furnace

Name: GS-T-1100S high-temperature heat treatment furnace
Brand: AHGSTEC

Annealing & heat treatment ≤ 1100 °C Ambient air Annealing

KEY DATADELIVERED

MAX TEMP

1100℃

ATMOSPHERE

Ambient air

Model: GS-T-1100S
Max. service temperature: 1100 °C
Working temperature range: 800–1100 °C (calibrated over the full range)
Uniform-temperature zone: 250 × 200 × 150 mm (D×W×H)
Minimum uniform-temperature zone: 200 × 200 × 150 mm
Uniform-zone temperature accuracy: ±5 °C (full temperature range)
System accuracy test (SAT): ≤±1.1 °C
Control accuracy: ±1 °C
Temperature uniformity: ±5 °C
Control mode: PID auto-tuning + SSR solid-state relay output
Temperature monitoring: Five-thermocouple system: control, recording, monitoring, load and SAT thermocouples

Chamber dimensions: 300 × 250 × 200 mm (D×W×H)
Chamber material: Alumina ceramic fibre
Shell material: Cold-rolled steel sheet + electrostatic spray coating
External body temperature: ≤50 °C
Overall dimensions (approx.): 850 × 750 × 1200 mm (D×W×H)
Control cabinet dimensions: 600 × 500 × 1200 mm (D×W×H)
Supply voltage: AC 380 V ±10 %, 50 Hz, three-phase five-wire
Rated power: approx. 12–15 kW
Max. operating current: approx. 23 A (calculated at 15 kW)
Safety protection: Over-temperature protection (independent monitoring thermocouple + over-temperature alarm controller, dual protection); door interlock cutting heater power on opening; over-current / short-circuit protection via circuit breakers on each loop; earthing protection; audible and visual alarm
Installation conditions: Indoor level floor, good ventilation; ambient temperature 5–40 °C; relative humidity ≤85 % (non-condensing); no strong electromagnetic interference sources or corrosive gases nearby